•
REGISTRATION YEAR: allows you to indicate the year the vehicle was
registered.
•
NORM: allows you to indicate the norm the test uses as a reference.
•
K LIMIT: allows you to indicate the limit value for the opacity (**).
(*) The engine oil temperature stated is the minimum value provided for by
the norm in effect. You are allowed to carry out the test at less than 80 °C.
If the outcome is negative, however, you must repeat the test, this time
bringing the vehicle to a temperature over 80 °C.
(**) The limit value must be read in the engine approval plate located in the
engine compartment and or in the door frame on the driver or passenger
side. If you are not able to locate the plate inside the vehicle you can use
the limits suggested by the software. In this case the following will appear
in the printed report in correspondance to the limit:
"The vehicle plate value has not been entered"
Use the browser keys to set the data required.
Press the
OK
key.
ENVIRONMENT DATA
This screen contains the ambient data detected by the tool.
The value of the following parameters is provided:
91
en