TEXA eLight ONE, Technical Manual

Page: 80 / 248

10 PREPARING FOR USE
TEXA S.p.A. offers its customers professional training courses.
In these training courses the technicians are followed step by step by
specialised personnel. Their goal is to give these technicians as much familiarity
with the tools and their software as possible. This way the technicians will learn
how to make the best use of TEXA S.p.A. products.
For more information regarding training courses offered by TEXA S.p.A.,
visit the website www.texa.com.
10.1 Assembly
The device is supplied unassembled.
The assembly instructions are provided together with the device, inside the
packaging.
The product must be assembled by properly trained personnel, following the
indications provided in the specific assembly instructions.
Do not try to repair the device if parts are missing or if defects or
damages are detected.
Contact Technical Assistance indicating the model, code and
serial number of the device.
Keep the packaging, complete with all the original packaging
material, should you need to send the product back to the
manufacturer.
Proceed as follows:
1. Place the wheeled base on
the surface.
2. Fasten the column to the
base using the specific screws.
79
en