Tews Technologies TCP872, User Manual

Page: 13 / 16

TCP872 V1.0 User Manual Issue 1.1 Page 13 of 16
4.2 Configuration EEPROM
The TCP872 is equipped with an on board I
2
C EEPROM. After power-on or PCI reset, the following
PCI Configuration Register of the PCI1520 PC Card controller will be initialized with hardware
depended configuration data:
Register Name Register Offset EEPROM Offset Value
Load EEPROM Data Flag - 0x00 0x01
Command Register PCI 0x04 0x01 0x00
Subsystem Vendor ID Register PCI 0x40 0x02 0x1498
Subsystem ID Register PCI 0x42 0x04 0x2368
PC Card16-I/F LBAR PCI 0x44 0x06 0x00000001
System Control Register PCI 0x80 0x0A 0x28D061
Multifunction Routing Register PCI 0x8C 0x0D 0x00C01D02
Retry Status Register PCI 0x90 0x11 0xC0
Card Control Register PCI 0x91 0x12 0x00
Device Control Register PCI 0x92 0x13 0x64
Diagnostic Register PCI 0x93 0x14 0x61
Power Management Capability PCI 0xA2 0x15 0x7E
ExCA Identification and Revision ExCA 0x00 0x16 0x84
Socket force Event (Function 0) CB 0x0C (function 0) 0x17 0x00
Socket force Event (Function 1) CB 0x0C (function 1) 0x18 0x00
Address Offset
0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 0xA 0xB 0xC 0xD 0xE 0xF
0x00 0x01 0x00 0x98 0x14 0x68 0x23 0x01 0x00 0x00 0x00 0x61 0xD0 0x28 0x02 0x1D 0xC0
0x10 0x00 0xC0 0x00 0x64 0x61 0x7E 0x84 0x00 0x00 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF
Figure 4-2 : Configuration EEPROM