MD 29401
7
Connecting the Digital Set Top Box
The following connections must be made before you can use the Digital Set Top Box to
watch digital TV. On the backside of the Digital Set Top Box you will find the following mark-
ings. Please follow these steps for the correct setup of the Digital Set Top Box:
TV-SCART
Connect your TV to the TV-SCART connector/jack using a
SCART/SCART cable or make use of the supplied SCART-RCA/S-Video
adapter cable. For best results we recommend using a double-coated
high quality shielded Euro SCART cable if your TV would be equipped
with a SCART socket.
RF-IN
Connect the cable of your regular terrestrial TV aerial to this connector.
power cable
Connect this moulded power cable and socket to an available power
socket.
Optional devices
L/R (AUDIO)
If you wish to hear superior sound through your Hi-Fi Stereo system
you can do so by using a stereo-cinch-cable. Please pay attention that
the audio channels of your stereo system are connected to the correct
connectors (L/R to L/R).
SPDIF
For the best possible sound reproduction –
Digital audio output.
Connect your amplifier with an S/PDIF IN socket using this connection.
Use a shielded S/PDIF cable for best results (not included).
VIDEO
Composite video out. Connect to your TV or VCR. Your TV or VCR must
support Composite IN (check your TV / VCR user manual). A composite
video cable is not included.
RF-OUT
If you wish to send the regular terrestrial aerial signal to your TV or
VCR connect the RF cable here.
RX/TX
For authorised service use ONLY.
