17
After Sales Support
Telephone:
1300 886 649
Features and functions
(continued)
Secret code setting and remote monitor function
You can set a secret code so the phone will only ring when the caller enters the
secret code. This function is useful when you do not want to be disturbed, except
by certain people who know the secret code. For the secret code setting to work,
the telephone ringer must be set to OFF and the caller must know the secret code
in order to dial through the line.
To set up the secret code:
1. In on-hook mode, press and hold the
RING
key for 3 seconds, the LCD displays
Pin ----
.
2. Input a 4-digit
PIN
using the numeric keys. (If you want the remote monitor
function activated, the last digit of the secret code must be #.)
3. Press the
DEL
key to edit the secret code, then press
SET
to confirm.
4. Set the ringer to OFF (see the following page).
Usage
1.
Secret code
: When a caller calls this telephone, they will hear the usual ringing
tone (when the line gets through) three or four times. However, the telephone
unit will not ring. The caller will hear a short “beep” sound, which means that the
caller needs to key in the secret code. Once the caller keys in the correct code,
the telephone unit will ring. Press the
key or pick up the handset to have a
conversation with the caller.
2.
Remote monitor:
If the last digit of the secret code is #, after the caller keys
in the correct secret code, the telephone unit will go into hands free mode
automatically.
3. If the caller keys in the wrong code, they will have to call again and key in the
correct secret code PIN.
