13
After Sales Support
Telephone:
1300 886 649
Setting flash time
1. In on-hook mode, press the
SET
key and press the
UP
/+ key three times, the LCD
displays
SET4 FLASH;
press the
SET
key again, the LCD displays
FLASH 300
.
2. Press the
UP
/+ or
DOWN
/- key to edit the
FLASH TIME
to 100, 300, 600 or 1000ms.
3. Press the
SET
key to confirm.
Setting alarm clock
1. In on-hook mode, press the
ALARM
key once, the LCD displays
12-00 AL1
.
2. Press the
UP/+
or
DOWN/
- key to select
ON
or
OFF
, the LCD displays the
ALM
icon when the alarm is set to ON.
3. Press the
SET
key, the value “
12
” starts flashing.
4. Press the
UP/+
or
DOWN/-
key to set the alarm hour and press
the
SET
key to
confirm, then enter the alarm minute setting.
5. Press the
UP/+
or
DOWN/-
key to edit the alarm minute and press the
SET
key to
confirm, then go to the next group of alarm clock settings.
6. Repeat the above steps to set additional alarms.
NOTE:
The first three groups of alarm will be repeated periodically every day
while the last two groups are only effected once.
Setting ring tone and adjusting ring volume
You can choose from 16 types of ring tone (plus no ring tone).
1. In on-hook mode, press the
RING
key, the LCD displays
Ring
02 db8
2. Press the
RING
key to select the desired ring tone, or set it to OFF.
3. Press the
UP/+
or
DOWN/-
key to set the ring volume.
4. Press
SET
to confirm and exit.
NOTE:
The volume ranges from
1db-8db
, with 8db being the loudest. Ring OFF is
“
Do Not Disturb
” mode. If the phone is set to this mode, the telephone will
not ring when there is an incoming call.
Features and functions
(continued)
