Helpline No. UK/Northern Ireland 01270 508538 Rep.Ireland 1800 995 036
Web Support www.quesh.co.uk
Model No: 44159
20
DIGITAL AUDIO SETUP
Digital Output
SPDIF/ OFF:
There will be no digital audio signal output. (Coaxial off )
SPDIF/ RAW:
The digital audio signal output will be in its raw format.
Normally, this mode is used for DTS & Dolby Digital 5.1 signals.
SPDIF/ PCM:
The digital audio signal output will be in PCM format. Normally,
this mode is used for audio CD signals.
LPCM Out
When the DIGITAL OUTPUT is set to SPDIF/ PCM, this option is then available.
Select a sample rating for the digital audio output. There are two options,
48KHz and 96KHz.
NOTE: Some amplifiers don't support 96KHz sampling which will affect
the coaxial output.
Channel delay
This item is used to set the delay time for the centre, rear speakers and the
subwoofer.
Use the direction buttons to select a speaker, centre speaker, subwoofer, left
surround speaker or right surround speaker. Then use the direction keys to
adjust the distance.
NOTE:
The unit does not support delays for when
the distance between the centre or surround
speakers and the listener are longer than
that between the front speakers and the
listener. In case the channel delay settings
cannot match your speaker configuration,
please set all distance difference to 0cm. If
possible use your receiver/amplifier to set
the channel delay.
