Operation
07/05/2018
73
7.3
Switching the machine on/off
Personnel:
n
Trained personnel
Protective equipment:
n
Occupational safety clothing
n
Safety shoes
n
Safety helmet
Power is supplied either by the mains (construction site feed) using an extension
cable, by the combustion engine or by the battery drive.
7.3.1
Switching the radio control on/off
Preparation
1
2
Fig. 69
1. Make sure that the emergency stop button (Fig.69/1) on the control box has
not been actuated.
2. Turn the ignition key (Fig.69/2) clockwise to position
[ 1 ]
.
Switching on
1
2
3
4
5
6
Fig. 70
3. Make sure that the emergency stop button on the radio control (Fig.70/1) has
not been actuated.
4. To switch on the radio control, turn the rotary knob (Fig.70/5) clockwise to
[ I ]
.
– The radio control beeps 2x, the rechargeable battery lamp (Fig.70/4)
flashes 2x.
– The radio connection lamp (Fig.70/2) flashes rapidly.
5. The display shows the message “Log in radio control” (Fig.70/6). Push the
rocker switch (Fig.70/3) to the right to the
[ Start ]
position.
– The radio control is logged in on the receiver.
– The radio connection lamp (Fig.70/2) flashes slowly.
NOTICE
After radio contact has been interrupted (e.g. due to changing the rechargeable
battery), the radio control has to be logged back in on the receiver by pushing the
rocker switch (Fig.70/3) to the
[
Start
]
position.
Summary of Contents for LEO 27T
