Emergency Control
38
7.2 Emergency Control Plat-
form/Chassis:
-operation with the manual pump is only intended for down, retracting and rotat-
ing movements
TOWARD THE TRANSPORT POSITION
- fix the platform-chassis valve on the valve block which is situated under the hydrau-
lic tank on symbol "platform" and lock the power regulation valve beside the valve
block
-Take the tube for the manual pump from the holder and slip it on the pinion of the
manual pump (check if handwheel is )
-select the required direction by pumping and actuating the corresponding valves
(marked red) at the same time
After using the emergency control, it is necessary to re-lock the valves!
In emergency control mode, the upper and
lower arm must be retracted completely be-
fore lowering them