The Support System
32
6.1 Bringing the Machine in Working Position
-Observe the supports while they are extended and retracted
To support the machine, position the supports at the required position and lock them
properly. At the ground control panel, turn the key switch to "I" and the platform func-
tion selector switch to "supports".
-Lower the supports evenly using the toggle switches and bring the aerial work plat-
form in working position
When the supports are in place correctly, the green lamps in the control panels light
up continuously.
-Bring the chassis in horizontal position by aligning the supports using the box level.
The bubble of the box level must be within the 1° circle.
