21
used again until a duly compentent person, having subjected such product to the
required testing and inspections, has approved its further use in writing.
It must be ensured that the recommendations for use with other components be
complied with: ropes need to meet EN 1891, while carabiners need to meet EN
362. Further PPE components must meet the harmonized standards under the re-
gime of regulation (EU) 2016/425. Be sure to observe the recommendations provi-
ded in this Manufacturer’s Information document and the specifications contained in
the “Documentation of Equipment”. The compatibility of all components in the load
chain is of critical importance. Ensure all neighbouring components are compatible.
Ensure all components are correctly configured. Failure to do so increases risk of
serious injury or fatality.
It is the responsibility of the user that a relevant and ‘live’ Risk Assessment is in
place for the work to be carried out which includes emergency contingencies. A
plan of rescue measures that covers all foreseeable emergencies needs to be in
place before this product can be used. Prior to and during use, rescue measures
that can be executed safely and effectively must be considered at all times.
WARNING AND SECURITY
If there exists only the slightest doubt about the safe condition of the product, be
sure to replace such product immediately.
A system that has been exposed to a fall shall be retired, or be returned to the
manufacturer or a duly qualified repair shop for maintenance and testing.
Snow, ice, and moisture may affect the product‘s handling and strength.
Be sure to avoid high temperatures, sharp edges, and exposure to chemicals
(e.g., acids). Rappel slowly to prevent the generation of great heat. UV radiation and
abrasion have an adverse impact on the rope and its strength.
Knots in the rope may cause a significant reduction of its breaking load.
TRANSPORT, STORAGE AND CLEANING
Note.
For transportation, storage and cleaning parameters also consult the specific
user instructions for all hardware that is part of the hipSTAR FLEX.
The textile pieces of the hipSTAR FLEX consist of polyester, aramide and aromatic
polyester Dyneema
®
. Aramides, Dyneema
®
and aromatic polyester are not UV sta-
ble. Sunlight and chemicals attack the material and cause it to lose strength. In the
event of reactions such as discoloration or hardening, the product shall be retired for
safety reasons. Furthermore, never expose Dyneema
®
to temperatures above 60°C.
The equalizing thimble is made of 174PH heat treated stainless steel which is post
electro polished.
SECURITY /
TRANSPORT, STORAGE & CLEANING
