11
USE
Pic. 9
b) SafeClick buckle
Closing the buckle
Push the parts of the buckle together until you hear
a "CLICK" noise. Check proper locking/functioning
of the buckle (buckle halves freely movable inside
each other, gap between buckle halves 2-3 mm;
pulling at both buckle halves).
Opening the buckle
1. Push buckle halves together.
2. Simultaneously press both unlocking buttons
towards the TEUFELBERGER logo
3. Pull parts of the buckle apart.
3. Fall arrest and holding eyelets:
(depending on the model and version of the har-
ness)
Pic. 10
Fall arrest eyelet (EN 361)
in the area of the back
(designated A)
Pic. 11
Fall arrest eyelet (EN 361)
in the area of the breast
(designated A)
Pic. 12-14:
Holding eyelet (E 813) waist belt front center
Pic. 15
Holding eyelet (E 358)
waist belt rear center
Pic. 16/17:
Holding eyelet (E 358) waist belt at the side
On TEUFELBERGER fall arrest harnesses, the wa-
ist belts (depending on model and design) include
mounts for gear (“gear loops” - Pic. 18) and tool
bag mounts (“attachment rings” - Pic. 19).
PIc 18
Pic. 19
They must not be used to belay persons and have
the following max. load carrying capacity (static):
Gear loop (Pic. 18):
2 kg max. per loop
(e.g., to transport carabiners, ascenders, aluminum
pulleys)
