6
CENTER
SUB
WOOFER
FRONT
RIGHT
FRONT
RIGHT
FRONT
LEFT
FRONT
LEFT
SURR
RIGHT
SURR
RIGHT
SURR
LEFT
SURR
LEFT
REAR
RIGHT
REAR
RIGHT
REAR
LEFT
REAR
LEFT
CENTER
CENTER
FRONT
RIGHT
FRONT
LEFT
SURR
RIGHT
SURR
LEFT
REAR
RIGHT
REAR
LEFT
CENTER
SUB
WOOFER
FRONT
RIGHT
FRONT
RIGHT
FRONT
LEFT
FRONT
LEFT
SURR
RIGHT
SURR
RIGHT
SURR
LEFT
SURR
LEFT
REAR
RIGHT
REAR
RIGHT
REAR
LEFT
REAR
LEFT
CENTER
CENTER
FRONT
RIGHT
FRONT
LEFT
SURR
RIGHT
SURR
LEFT
REAR
RIGHT
REAR
LEFT
11
10
Use
Activating/deactivating and switching
to standby mode
• The subwoofer is activated or deactivated with the switch
10
“Power”. When the subwoofer is on, the LED
9
“Power” is
illuminated in
– green, if the subwoofer is in operating mode
– red, if the subwoofer is in standby mode.
Automatic activation/switching to standby mode
• Switch
6
“On Auto”:
–
Auto
position: The subwoofer activates as soon as an
audio signal is present at the input jack
2
“Line In / SW”.
If there is no audio signal for 20 minutes, the subwoofer
automatically switches to standby mode.
–
On
position: The subwoofer is continually activated.
Changing the input sensitivity of the automatic
activation
• You can change the sensitivity of the automatic activation
using the controller
3
“Auto Level”. This is helpful if the
subwoofer does not activate in spite of a present audio sig-
nal or if it is activated by glitches.
Use a small screw driver for turning the controller.
Volume
• You can control the volume of your subwoofer using the
volume control
4
“Volume”.
Phase
• Switch
7
“Phase” is used to activate and deactivate phase
shifting (180°) for the subwoofer. Choose a setting at which
the subwoofer emits the loudest and most precise sound.
HP-Filter
• With the high-pass filter
5
you can set a value between 30
and 70 Hz. All frequencies, which are lower than this set
value are weakened or completely faded out.
• The filter is intended to adjust the subwoofer to small rooms
in order to avoid potential droning sounds.
2
5
6
7
8
9
4 3
Connection to the grid
• Ensure that the mains switch
10
“Power” on the subwoofer is
switched off (“0 OFF” position).
• Connect the mains connection jack
11
with an easily acces-
sible power socket using the power cord.
• In addition, reconnect the power plug of your preamplifier
(DecoderStation or ControlStation) to the socket.
