Teufel US 8112/8 SW Technical Description And Operations Manual Download Page 5

5

Connecting the subwoofer

Danger

Danger of injury/damage!

Arrange the cables so that they do not pose a 

trip hazard.

1. Pull the power plug of all devices to be connected out of the 

socket to prevent accidental activation.

2. Use 4 stereo RCA cables to connect the LINE IN jacks 

2

 

of the subwoofer with the 7.1 output jacks of a pream-

plifier, such as a DecoderStation or ControlStation. In 

the process make sure that you always connect the ap-

propriate jacks with each other (e.g. CENTER/CENTER or 

SUB / SUBWOOFER). 

 

If you use a 5.1 source device (DecoderStation 5, DVD 

player, sound card), the subwoofer input jacks REAR RIGHT 

and REAR LEFT are not occupied. However, you can route the 

SURR RIGHT and SURR LEFT signals to the REAR RIGHT and 

REAR LEFT inputs using a cinch Y adapter. The same signals 

will then be emitted via the SURR RIGHT and REAR RIGHT 

as well as the SURR LEFT and REAR LEFT speaker outputs 

though.

Connecting satellite speakers

Make sure the polarity is correct!

Connect the like coloured terminals. Otherwise the 

sound quality will suffer. 

The strands of the speaker cables are marked with different 

colours or shapes.

1. The connector terminals 

1

 for the satellite speakers are 

located on the back side of the subwoofer. 

Lay the included speaker cables from your subwoofer to 

each of the speakers. 

Little hint: Label the cables on the subwoofer side. This will 

help when taking down and setting up the system.

2. Split the single wire down to approx. 30 mm on both ends 

and strip approx. 10 mm of insulation off of each cord.

3. Twist the stripped single wire ends together so that no wire 

protrudes. Tin coating is not necessary.

4. Turn the connector terminal counterclockwise until loose. 

Run the stripped cable end into the now visible hole. Close 

the terminal by turning it counterclockwise. The cable 

has now been clamped in place. Connect all cables to the 

subwoofer in this way.

5. Connect the other ends of the speaker cables to the satellite 

speakers. The operating instructions of the speakers should 

contain notes on this.

CENTER

SUB

WOOFER

FRONT

RIGHT

FRONT

RIGHT

FRONT

LEFT

FRONT

LEFT

SURR

RIGHT

SURR

RIGHT

SURR

LEFT

SURR

LEFT

REAR

RIGHT

REAR

RIGHT

REAR

LEFT

REAR

LEFT

CENTER

CENTER

FRONT

RIGHT

FRONT

LEFT

SURR

RIGHT

SURR

LEFT

REAR

RIGHT

REAR

LEFT

CENTER

SUB

WOOFER

FRONT

RIGHT

FRONT

RIGHT

FRONT

LEFT

FRONT

LEFT

SURR

RIGHT

SURR

RIGHT

SURR

LEFT

SURR

LEFT

REAR

RIGHT

REAR

RIGHT

REAR

LEFT

REAR

LEFT

CENTER

CENTER

FRONT

RIGHT

FRONT

LEFT

SURR

RIGHT

SURR

LEFT

REAR

RIGHT

REAR

LEFT

DecoderStation/ControlStation (7.1-System)

DecoderStation/ControlStation (5.1-System)

Subwoofer US 8112/8 SW

2

2

1

Pre Out

Front

Left

Right

Center

Rear

Front

Center

Rear

Front

Sub

Rear 

Front

Sub

Rear

Coaxial 2 Optical 1 Optical 2 DC +12 V/1A

5.1 In

Aux

CD

TV

Coaxial 1

Stereo In

Digital In

For a 5.1 system, the subwoofer input jacks REAR RIGHT and 

REAR LEFT are not used.

Summary of Contents for US 8112/8 SW









Reviews: