5
1
2
3
4
1. Set the sliding switch to position
B
or
C
(see Fig. on p. 6).
The headphones are in pairing mode.
The LED
4
will blink in blue.
2. If this does not happen, hold the
multifunction button
2
down for about
2 seconds.
Pairing mode has now been reactivat-
ed; the LED
4
will blink in blue.
3. Turn on the Bluetooth
®
function
on your external player (e.g. smart-
phone).
4. Let your smartphone search for Blue-
tooth
®
devices (you can find more
information in the user manual of
your smartphone).
“Teufel MUTE BT” should appear in
the list of the detected devices after
the search run.
5. Select “Teufel MUTE BT” from the list
of detected devices. If your external
player requires the entry of a PIN
code, enter the PIN code “0000” set
by factory default.
A signal tone will sound if the head-
phones and your Bluetooth
®
device
are connected.
The MUTE BT will now play back all
sounds that would otherwise be
played by your smartphone.
6. To terminate the Bluetooth
®
con-
nection, switch off the Bluetooth
®
function on your external player
(smartphone).
Reconnecting to a paired
external player
If your MUTE BT has been previously
connected with your external player
(smartphone), enabling the Bluetooth
®
function on your external player (smart-
phone) is all you have to do to connect
the two devices.
Resetting the Bluetooth
®
pairing
settings
To reset the Bluetooth
®
pairing settings,
move the sliding switch to position
B
or
C
.
Hold down the multifunction button
2
and button
3
“decrease volume” simul-
taneously for approx. 4 seconds. The
LED
4
will blink twice in blue and the
Bluetooth
®
pairing settings will have
been reset.
Phone calls with the MUTE BT
If your MUTE BT is connected with a
compatible smartphone or mobile
phone, you can make phone calls with
the MUTE BT just as you would do with a
headset. The headphones have a built-
in microphone. Music playback will be
interrupted in the event of an incoming
call and a ring tone will sound instead.
The following functions are available:
Accept incoming
call.
Briefly push the
multifunction
button
2
.
Reject incoming
call.
Push and hold
the multifunction
button
2
.
