17
• MusicStation
Clock/Alarm Clock
The integrated clock shows the current
time on the display
(2)
. The clock is set
manually or by RDS when in radio mode.
An alarm time and a sleep function (up to
120 minutes) are also available.
If the time display is flashing, the clock
must be set.
In the event of a short power failure, the
time setting will be preserved; only after
at least 30 minutes without power, the
time will flash indicating that it must be
re-entered.
Setting the time
With RDS
1. Select a radio station with an RDS
signal (see page 21).
2. Push the RDS/CT button
(28)
for ap-
proximately 3 seconds.
If the message “NO CT” appears on the
display, the MusicStation has not yet
received the time signal from the radio
station. Release the RDS/CT button
(28)
and repeat step 2.
Once the message “STORED CT” ap-
pears on the display, the time has been
received and the internal clock has
been set accordingly.
Manually
If no RDS station is being received, you can
also set the clock manually:
• If you do not push a button for 5
seconds when completing the following
steps, the function will be aborted and
your entry will be discarded.
1. Briefly push the CLOCK button
(29)
once. The time will appear on the
display
(2)
.
36
16
29
28
2
