• Impaq 6000
15
Radio playback
Set the source to one of the two radio reception ranges
(see previous page):
FM
– Reception of mono and stereo stations in the range
from 87.5 to 108 MHz, RDS mode possible
AM
– Reception of mono stations in the range from 522
to 1,629 kHz
A memory for 25 stations is available for each range (see
below).
Setting the radio stations
Set the reception frequency with the buttons
55
and/or
76
T./–:
Automatic
•
: After holding down the button for three
seconds, the station scanning in the selected direction
will begin until a station with a strong enough signal is
found.
Manual
•
: When you tip the button, the frequency is
increased and/or decreased by one increment (FM:
0.05 MHz, AM: 9 kHz).
Station memory
Your radio can save 25 stations for the AM and 25 sta-
tions for the FM reception range. You can then conven-
iently select the stations later by pressing a button.
Saving the stations manually
Set the desired station as described above.
•
Enter the desired memory slot number using the
•
number pad
50
. “INPUT nn”
(nn = memory slot number) will appear on the display
fi eld
Push the button
•
74
T.SAVE.
“FMnn” or “AMnn” will appear on the display fi eld.
The station has been saved. After three seconds of key
inactivity, the device will switch back to normal mode.
Saving the stations automatically
Briefl y press the button
62
PLAY.
The device will save the fi rst 25 stations for the recep-
tion range. The radio then switches to the station in the
memory slot 1.
Selecting stations from the memory
You can select the saved stations consecutively with the
buttons
59
T.CH
–
and/or
60
T.CH+.
Changing the memory slot
Enter the new memory slot number with the number
•
pad
50
.
Push the button
•
50
GOTO.
The memory slot will be renamed.
58
50
59
60
62
74
55
76
91339 GB 20100111.indd 15
91339 GB 20100111.indd 15
11.01.2010 14:09:30 Uhr
11.01.2010 14:09:30 Uhr
