background image

 

 • Concept C 200 

11

Care an cleaning

Clean your 

Concept C 200

 regularly with a soft, slightly 

damp microfibre cloth. Please be absolutely sure to ob-

serve the following:

Danger

Risk of electric shock!

In contact with live parts water can lead to 

electric shock or short circuit.

•  Ensure that no water gets into the unit.

•  Disconnect the device from the mains power supply 

before cleaning.

Attention

Risk of damage!

Using the wrong cleaning materials may dam-

age the delicate surface of the case.

•  If possible use only plain water with no cleaning prod-

ucts. In case of stubborn marks a mild soap solution 

may be used.

•  In no circumstances should caustic cleaning products, 

white spirit, thinners, petrol or similar be used for 

cleaning.

Troubleshooting

The following notes and further detailed 

information on our website

 should help you to rectify malfunctions. If this does 

not lead to success, please contact our hotline

 

00800 - 200 300 40 (free of charge). Please also observe the warranty 

notes.

Störung

Mögliche Ursache

Abhilfe

The unit produces no 

sound.

Volume is set to »0 «.

Increase the volume.

Fuse defective.

1.

2.

spare

Disconnect the power 

cord.  

Carefully pull the fuse 

holder out of the mains 

connection.

Push the old fuse out. 

Insert a new fuse (3.15 AL 

delayed action) and push 

the holder back.

The input signal is too low

Increase the volume at the source device.

Subwoofer buzzes.

The buzzing is caused by problems 

with the power supply.

Purchase a line filter and connect it to the device.

The buzzing is caused by a multi-

way socket.

Use another multi-way socket or plug the subwoofer 

directly into the wall socket. In the case of two-pin 

plugs it may help to insert the plug into the socket the 

other way up.

Playback is noisy.

The 

Concept C 200

 is a very low-

noise system. What often happens 

is that the speaker system which 

is excellent in the treble range 

exposes the poor quality of a signal 

source (e. g. from MP3 files).

Make sure that the signal being sent from the source 

to the 

Concept C 200

 is free from faults.

Summary of Contents for concept c 100 black edition













Reviews: