Teuco Next 161, Assembly Instructions Manual

Page: 31 / 52

31
-161 SHOWER – PLUMBING CONNECTIONS
C - Hot water connection. Use a flexible stainless steel
hose 65 cm long.
F - Cold water connection. Use a flexible stainless steel
hose 65 cm long.
- 161 SHOWER WITH ROOF (OPTIONAL)
– PLUMBING CONNECTIONS
C - Hot water connection. Use a flexible stainless steel
hose 65 cm long.
F - Cold water connection. Use a flexible stainless steel
hose 65 cm long.
5 - Connection of nebulizer showerhead hose 5.
- 161M SHOWER WITH MULTIFUNCTIONS
- PLUMBING CONNECTIONS
C - Hot water connection. Use a flexible stainless steel
hose 65 cm long.
F - Cold water connection. Use a flexible stainless steel
hose 65 cm long.
5 - Connection of nebulizer showerhead hose 5.
- 161C SHOWER SAUNA - PLUMBING CONNECTIONS
Position the roof assembly on the cabin:
C - Hot water connection. Use a stainless steel flexible
hose 65 cm long.
F - Cold water connection. Use a stainless steel flexible
hose 65 cm long.
3 - Connection of sauna drain hose 3.
5 - Connection of nebulizer showerhead hose 5.
- 161C SHOWER SAUNA – ELECTRICAL CONNECTIONS
Position the roof assembly on the cabin:
CA - Electrical connection for sauna system
T - Electrical connection for alarm system (only if
bathroom is equipped with alarm system).
12 - Connection of cable running from power unit to roof.
- EQUIPOTENTIAL BONDING
Connect point (
) to the main earth node for the
bathroom.
VERIFICATION OF PLUMBING AND ELECTRICAL
CONNECTIONS
- Having made all the connections, start the system up as
described in the accompanying user manual.
Check there are no leaks at connection points and that
everything is working as it should.
Push the cabin against the wall, taking care not to damage
the waste connection made previously.
FIXING THE CABIN TO THE WALL - ART. 161 ONLY
- Fit the brackets to the shower with screws and threaded clips;
- Drill the wall, using the slot in each bracket as a guide.
- Use the fasteners kit (D) in the accessories bag.
Locate the spacers on the screws.
Insert the masonry plugs and fix the cabin to the wall.
Fit the concealers to the spacers.
IMPORTANT: Having secured the cabin to the wall,
check again that the doors close properly, as described
in steps 11 and 12.
FIXING THE CABIN TO THE WALL
- ART. 161 +ROOF (OPTIONAL) - 161M ONLY
- Fit the brackets to the shower with screws and threaded clips;
- Drill the wall, using the slot in each bracket as a guide.
Use the fasteners kit (D) in the accessories bag.
Locate the spacers on the screws. Insert the masonry plugs
and fix the cabin to the wall.
- Secure the roof to the cabin with the screws and washers.
- Fit the concealers to the spacers.
IMPORTANT: Having secured the cabin to the wall,
check again that the doors close properly, as described
in steps 11 and 12.
FIXING THE CABIN TO THE WALL - ART. 161C ONLY
- Fit the brackets to the shower with screws and threaded clips;
- Drill the wall, using the slot in each bracket as a guide.
- Insert the masonry plugs and fix the cabin to the wall.
IMPORTANT: Having secured the cabin to the wall,
check again that the doors close properly, as described
in steps 11 and 12.
FITTING THE ROOF - ART. 161C ONLY
- Separate the top part of the roof assembly.
- Secure the bottom part of the roof to the cabin with screws
and washers.
- Reposition the top part and secure with the screws and
washers removed previously.
FITTING THE INSPECTION PANEL
- Fit the inspection panel, locating the pins in the sockets of
the shower base.
19
18
C
18
B
18
A
17
C
17
B
17
A
16
D
16
C
16
B
16
A
15
C
15
B
15
A
14
13