Page 2
MOUNTING THE TETRAMOUSE
These instructions use the terminology for the various parts
as shown in the illustrations on the previous page. These
terms are capitalized in the following instructions. “Up” and
“Down” references are relative to the image of the Base
Clamp on the previous page.
The Base Clamp is mounted to a desktop or tubular frame of
bed, wheelchair, etc., using the Lower Knob and Upper Knob
to tighten and hold the clamp securely. To mount to a desktop
or tubular object, first turn the Upper Knob up until it is loosely
against the nut at the bottom of the Clamp Base, then turn the
Lower Knob until the Jaw can be moved down far enough to
accommodate the thickness of the mounting surface or
diameter of the tubular object. Next, turn the Lower Knob
back up to bring the Jaw up against the mounting surface or
tubular object and tighten it firmly until the Base Clamp is held
to the surface. Then turn the Upper Knob to bring it down onto
the top of the Jaw and tighten it firmly.
Loosen the Universal Ends and Universal Elbow to allow
mounting the arm to the Base Stud on one end, and mounting
the TetraMouse with the Mouse Mounting Stud on the other
end.
Summary of Contents for TetraMouse TMXS
Page 1: ...MODEL TMXS...
