Page 1
If you ordered TetraMouse Mounting System with
your TetraMouse, follow these instructions for
mounting. If you will be using another mounting
system please refer to the documentation for that
system. The size 1/4”-20tpi threaded stud that
protrudes from the back of the TetraMouse is used
for mounting. If using the TetraMouse Mounting
System, the Mouse Mounting Stud is tightened
firmly onto the threaded stud on the TetraMouse.
The Base Clamp mounts to a flat surface or a
tubular object. Either Universal End of the
Articulated Arm is then attached to the Base Stud.
The TetraMouse is then attached to the other
Universal End of the Articulated Arm using the
Mouse Mounting Stud.
ARTICULATED ARM MOUNTING SYSTEM
SET UP
BASE STUD
JAW
UPPER KNOB
LOWER KNOB
BASE
BASE CLAMP
ARTICULATED ARM
UNIVERSAL END
CABLE CLIPS
UNIVERSAL ELBOW
UNIVERSAL END
TUBE CAP
TUBE CAP
MOUSE
MOUNTING
STUD
TETRAMOUSE
Summary of Contents for TetraMouse TMXS
Page 1: ...MODEL TMXS...
