Tetra Pak HOYER COMET C, Manual, Page: 17 / 150

CC901AD 4-4
Tetra Pak
Hoyer
Fig.4.4
Fig.4.3
2
1
2
2
Make sure that the ice-cream pipes from the
bypass valve (Part.1/2 Fig.4.4) to the dosers are
connected as required.
Connect the ice-cream pipes from the freezers to
the ice-cream dosers through the bypass valves
(Part.1/2 Fig.4.4) located above the pneumatic
panel.
fter having made the electrical and pneumatic
connections, check the direction of rotation of
the machine as follows:
•
Make sure that there are no foreign bodies
which may prevent the machine from
operating.
• Release the emergency stop button.
• Rotate the main switch.
• Slowly turn on the air supply.
• Press the jog button and check that the
lamellas move from left to right (Part.2
Fig.4.3) when looking at the machine from
4.5 Checking the direction of rotation
4.6 Freezer connection
the operator’s side.
• Press the stop to stop the chain.
WARNING:
If the direction of rotation is incorrect, invert the
two phases at the terminal board.
This operation must be carried out exclusively
by competent technicians familiar with accident
prevention legislation.
Before starting-up the freezers connected to the
machine, place a container under the ice-cream
bypass outlet pipe and another under the product
collection chute.