TESY QH04 120, Usage And Safety Instructions

Page: 4 / 72

4
Usage and Storage Instructions
EN
•
In case the appliance is not to be used for a long
period of time, you should pack it together with its
manual in its original packing and store it at a dry
and well-ventilated place.
•
The appliance must not be installed onto ceilings!
•
WARNING: This heating appliance is not equipped
with a temperature controlling device. Do not
operate this heating appliance in small premises
when there are people inside, who are unable to
leave the room by themselves, unless permanent
supervision is provided.
•
The appliance must be installed on a wall in a stable
horizontal position and at least at 1.8 meters above
the floor. Distance to ceiling should be at least
0.75 meters.
Do not install the appliance vertically or in
inclined position!
PACKING
•
After unpacking the appliance, check if any
damages have occurred during transportation or
whether the appliance set is complete! In case of
damage or incomplete packing, you should contact
your official retailer!
•
Do not dispose of the original packing! It could be
used for storage and transportation purposes in
order to prevent possible damage!
•
Disposal of packing materials should be done in a
proper manner! Children should be prevented from
playing with polyethylene bags!
INSTALLATION
Important: Before assembling the appliance – check
if the package contains all indicated parts!
1. Quartz heating elements
2. Heating levels adjustment display
3. Switch
Wall installation
•
Important: Ensure that there are not any elements
of electrical system or piping close to the drilling
openings. Ensure one more time that the appliance
is installed firmly, reliably and horizontally on the
wall!
•
In order to install the appliance onto the wall, use
the brace provided in the appliance set.
•
Drill three holes (1), so that the feet (2) of the wall
brace are in vertical position.
•
Slide the plastic body of the heating appliance into
the wall brace above, until it gets fixed.
In this way the feet (2) of the wall brace settle into
the openings (3) of the plastic body.