TESY CN03 050 EIS Wi-Fi, Instructions For Use Manual

Page: 13 / 24

Instructions for using the built-in wireless communication module (Wi-Fi)
13
EN
English
Thank you for the trust which you have put in us by purchasing our electric convector with a built-in wireless
communication module. The only prerequisite to using the built-in wireless communication module in the "TESY"
convectors is to have a device which allows access to Wi-Fi networks, with a reliable Web browser and a connection
to the internet.
SPECIFICATION OF THE BUILT-IN WIRELESS COMMUNICATION MODULE:
Product Wi-Fi module
Rated RF output power 11b: +17 ±1dBm ; 11g: +14 ±1dBm ; 11n: +12 ±1dBm
Operating state : frequency range 2. 412 - 2. 4835 GHz
Number of channels 13
Separation between channels 22 MHz
Modulation type OFDM
Antenna type PCB Helical Antenna type
Protocol IEEE802. 11b/g/n (1T/1R mode) up to 150 Mbps
SEQUENCE OF STEPS FOR CONNECTING THE BUILT-IN WI-FI MODULE
IN THE "TESY" CONVECTOR TO THE INTERNET
Register in
www.mytesy. com:
1. Open the address http://www.mytesy. com in the address bar of the browser.
2. Select "Register a New Account" .
3. Fill in the registration form with a valid e-mail address.
*the displayed e-mail is a sample and is intended to show the positive
response, if the registration is successful