TESTO Smart Probes 115i, Instruction Manual

Page: 7 / 17

2.6 Displaying Smart Probe details ( )
✓
One or more Smart Probes are connected to your mobile terminal
device via Bluetooth.
1. Press : All connected Smart Probes are displayed in this
list.
2. Select the Smart Probe whose details you would like to see

A list appears with the details for the Smart Probe
(e.g. measurement cycle)
3. Press Close to exit the detailed view.
2.7 List, graphic diagram and table view
The available readings can be displayed in different ways in the various views.

List view
= Displays the readings transmitted by the Smart Probe in form of
a list. Readings from all connected Smart Probes are displayed
here.

On the left three digits in each line indicate the three last
numbers of the serial number of the connected smart probe

Use two fingers to change the size of each line

Graphic diagram view
= The graphical progression of up to four different readings can be
displayed. Tap on a reading above the diagram to select which
Smart Probe value should be displayed.

Press Hold to stop the measurement and to minimise or
maximise the time interval on the x-axis. Continue will restart
your measurement.

Press to discard the values and restart your measurement
(available in every application)