TESTO 6651 Instruction Manual Download Page 31

Page: 31 / 72

testo 6600

- 3.2 First steps

115

3.1.3

Scope of delivery

Included in the scope of delivery are:



P2A software



USB driver

When working with the parameterizing, adjusting and
analyzing software (P2A software), previous knowledge of
Windows

operating systems is assumed.

The description in this instruction manual relates to
Windows

XP.

3.2 First steps

3.2.1

Installing the software/driver

Administrator rights are required to install programs and
drivers under Windows

2000 SP4, XP and Vista.

3.2.1.1 Installing

P2A

software

1 Insert CD with P2A software. If the installation program does not start

automatically:

2 Open Windows Explorer and start the file

Setup.exe

on the product

CD.

3 Follow the directions of the installation assistant.

3.2.1.2 Installing

USB

driver

Before installing the USB driver, please read the separate
documentation that is enclosed with the USB driver CD.

3.2.1.3

P2A software upgrade

Insert product CD (supplied with the transmitter).
Open Windows

Explorer and start the file

P2A upgrade.exe

on the

product CD.

Follow the directions of the installation assistant.

Summary of Contents for 6651









































































Search results

Summary of Contents for 6651

Reviews:

Related manuals for 6651

Brands by name

Popular brands

TESTO 6651, Instruction Manual

Search results

Summary of Contents for 6651

Reviews:

Related manuals for 6651

Brands by name

Popular brands