110
testo 6600
-
2.4 Maintenance and cleaning
Screw on protection cap by hand, i.e. do not tighten it using a
tool.
3 Replace
O-ring
(7)
if necessary. Push probe shaft into duct as far as
the marking and fix position with screw
(11)
.
2.4.1.3
Replacing the filter/protection cap for
testo 6604/6605 cable version
Do not damage the sensor when exchanging the filter/the
protection cap and do not touch its surface!
1 Carefully unscrew defective filter/protection cap
(2)
from probe shaft
(1)
.
2 Carefully screw new filter/protection cap onto probe shaft.
Screw on protection cap by hand, i.e. do not tighten it using a
tool.
1
2