testo 6651 Ethernet
- 1.4 Operation
71
1.4.6.6
Editing Message main menu
The last messages can be called up and the display of the messages can be
switched on or off.
Using the P2A software (see
volume 2, chapter
3.3.2, page
119
) you can predefine which of the messages are to be
shown in the display.
1 In Measuring Mode, press set, select Main Menu Message using
or
and confirm selection with set.
2 Confirm
Confirm message
using SET.
3 Select
Last messages
using
or
and confirm with SET.
4 Scroll between the messages recorded so far using
or
and press
ESC to return to
Last messages
.
5 Continue
to
Display of message
with
or
.
ON
:
Measurements are shown on the display in Measuring Mode.
OFF
:
No messages shown on display.
6 Select
ON
or
OFF
using
or
and confirm selection with SET.
7 Return
to
Main Menu Message
by pressing ESC.
8 Continue
to
Main Menu Ident
using
or
or return to Measuring
Mode by pressing ESC.
An overview of the messages can be found in
chapter 1.5
,
Status, warning and error messages
,
page 76
.
348
h
4/7
Scaling changed
Operating hours at the time of
message
Message number/number of messages
present
Example: "4/7" refers to the fourth of
seven messages
Message text
1.888.610.7664
www.
Testo-Direct
.com
