testo 6651 Ethernet
- 1.4 Operation
67
Using alarm as collective alarm or not using it at all
If the collective alarm is assigned to an alarm, the relay is switched as soon
as (at least) one of the warning or error messages of the testo 6651
transmitter (or the connected testo 6600 probe) is activated.
Note:
The messages affecting the collective alarm can be selected
in the P2A software (see
volume 2, chapter 3, page 113
).
Alarm is selected (see previous steps 1 and 2).
1 Specify
with
or
whether
Alarm x
is to be used as the
Alarm
relay
or is
not to be used
. Confirm selection with SET and return to
Alarm x
.
2 Change to another alarm using
or
and perform settings in the
same way.
3 Continue
to
Main Menu Settings
using
or
or return to Measuring
Mode by pressing ESC.
1.4.6.4
Editing Main Menu Settings
You can edit instrument settings and other settings.
▪
In Measuring Mode, press SET, select
Main Menu Settings
using
or
and confirm selection with SET.
You can edit settings for:
Display
Language
Code.
Editing display settings
You can set the brightness and contrast of the display.
1 Select Display Settings using
or
and confirm selection with set.
2 Select
Backlight
,
Contrast
or
Backlight on 24 h
using
or
and
confirm selection using SET.
One of the following parameters can now be selected using
or
, after
which the selection must be confirmed with SET:
1.888.610.7664
www.
Testo-Direct
.com
