6 Using the product
16
6.1.1.
Location
1.
Use
or
in main menu to select
Location
.
2.
Use
to activate setting mode.
- The location that is currently set will be displayed. If a location
designation was assigned by the Easyheat software, this is also
shown.
- If data is already stored for the chosen location,
is shown.
3.
Use
or
to select the desired location.
To enter a new location:
> Press
the
key until
NEW
appears in the lower line.
A location is created when the unit is first
commissioned. Up to 98 additional locations can be
added.
4.
Confirm the selection with
.
6.1.2.
Memory
1.
Use
or
in main menu to select
Memory
and confirm
selection with
.
2.
Use
or
to select the desired save mode.
3.
Use
to activate setting mode.
Man/Auto
1.
Use
or
to select manual, automatic or fast and
confirm the selection with
.
•
Manual
: The current reading is saved by pressing
in
the measurement view.
•
Automatic
: A measurement program is started by pressing
in the measurement view. Readings can be recorded
over max. 24 hours with the automatic measurement
program (measuring rate: 1 second).
Summary of Contents for 312-4
Page 1: ...testo 312 4 Pressure measuring instrument Instruction manual...
Page 2: ...2...
Page 37: ......
Page 38: ...0970 3126 en 06 V01 05...
