7
WLAN communication module
6
2
Place the communication module on the testo 150 data logger module.
3
Attach the communication module to the testo 150 data logger module
using the screws.
4
Close screw openings with rubber plugs.
It is not possible to replace communication modules while the testo 150
data logger module is in operation!
To replace a communication module, the power supply must be
disconnected (remove batteries/pull out mains plug).
Once the communication modules have been installed, the testo 150
data logger module can be returned to its original packaging.
6.4
Technical data for the LAN/PoE
communication module
PoE performance class 0
max. 7 W
Feature
Value
Order no.
0554 9330
Connections
TCI
LAN/PoE
Dimensions (W x H x L)
69.3 x 17.7 x 29.0 mm
Weight
Approx. 45 g
Protection class
IP30 with mounted testo 150 data logger
module
Housing material
PC/PET (front); ABS+PC+10% GF/PET (rear)
Communication cycle
5 seconds - 24 hours
Storage temperature
-35 °C to 60 °C
Operating temperature
-35 °C to 50 °C
7
WLAN communication module
7.1
Use
The WLAN communication module for the testo 150 data logger module is
designed for the wireless transmission of measurement data. The product is
used in the monitoring of products subject to cold chain requirements in
warehouses, production facilities, cold rooms, clinics, laboratories and
laboratory equipment.
