Operation manual Pneumator
∙
Testo Industrial Services
∙
Version 1.4
∙
2019
∙
Page 5
2.
Overview operation elements
The Pneumator has two pressure connections, one display as well as 9 control
buttons:
Pressure „+“ With differential pressure, the higher pressure must be attached here
With relative pressure, please attach only to this connector
Pressure „-“ With differential pressure, the lower pressure must be attached here
Display
Depending upon selected mode of operation all relevant
information is shown here.
The operating keys are described in the section „general instruction information“
Interfaces:
On the back of the Pneumator, you will find the following interfaces:
- Voltage supply (20..26 VDC, 1 A, min. 30 W, by provided power supply)
- RS232
- USB
3.
Operating modes
