59
58
Ordering data
Standard room conditions probe for
measurements up to +70 °C
Ø 12 mm (probe tip)
Duct humidity/temperature probe,
telescopic extension can be connected,
Ø12 mm
Telescope, length: 340 - 800 mm
Highly accurate reference
humidity/temperature probe, Ø 21 mm
Flexible humidity probe with mini module
for measurements, e.g. on material test
rigs. Length of module cable: 1500 mm
Thin humidity probe incl. 4 plug-on
protective caps for room climate
measurements, measurements in
exhaust air ducts and equilibrium
moisture measurements.
0 to 100 % RH
(probe tip)
-20 to +70 °C
± 2 % RH (2 to 98 % RH)
± 0.4 °C(0 to 50 °C)
± 0.5 °C (rem. range)
<12
at
2 m/s
0636.9740
0 to 100 %RH
(probe tip)
-20 to +70 °C
± 2 %RH (2 to 98 % RH)
± 0.4 °C (0 to 50 °C)
± 0.5 °C (rem. range)
<12
at
2 m/s
3 m
PUR
0636.9715
0430.9715
0 to 100 %RH
(probe tip)
-20 to +70 °C
± 1 % RH (2 to 98 % RH)
± 0.4 °C (0 to 50 °C)
± 0.5 °C (rem. range)
<12
at
2 m/s
0636.9741
0 to 100 %RH
-20 to +125 °C
± 2 % RH (2 to 98 % RH)
± 0.4 °C (0 to 50 °C)
± 0.5 °C (rem. range)
20
0628.0013
* Accuracy data at rated temperature of +25 °C,
Temperature coefficient: ±0.03 % / °C
Add. probes
for testo 950, 650, 400
CO probe
CO
2
probe
Leak detection probe
Mechanical rpm probe with plug-in head.
Current/voltage cable (±1 V, ±10 V, 20 mA)
0 to 500 ppm
±5 ppm (0 to 100 ppm)
±5 % of m.v. (rem. range)
0632.1247
0 to 1 vol. % CO
2
0 to 10,000 ppm CO
2
50 ppm ±2% of m.v.
(0 to 5000 ppm)
100 ppm ±3% of m.v.
(rem. range)
0632.1240
0554.0007
20 to 20.000 rpm
0.33 to 333 Hz
±1 digit
0640.0340
0 to 20mA/4 20mA 0
± 1V/0 ± 10V
± 0.04 mA
± 0.001 V / ± 0.01 V
Meas. range
Accuracy *
Part no.
t
99
s
Connection cable
Please order connection
cable (p. 61)
Humidity/temperature probes for air conditioning and ventilation sector
for testo 650, 400
Plug-in head
Please order
connection cable (p.61)
Plug-in head
Please order
connection cable (p.61)
Plug-in head
Please order
connection cable (p.61)
Ordering data
Please order
adapter
0600.1693
0644.1109
Pack
of 5
Highest temp. +400 °C
Highest temp. +200 °C
0644.1607
Packung
à 2 Stk.
0.3 m PVC
0600.1693
0 to +120 °C
± 0.5 °C (0 to 50 °C)
± 1 °C (50 to 120 °C)
1.5 m
0554.0670
-18 to +260 °C
2
0600.0750
PUR coiled
cable
0554.0004
Standard
immersion/penetration probe
Rated length = 200 mm, Ø probe tip: 3 mm
Precision immersion/penetration probe
Rated length = 200 mm, Ø probe tip 3 mm
Protective glass
for
immersion/pen. probe 0604.0273 and 0628.0015
Flexible precision immersion probe
Rated length = 1000 mm,
Robust probe with sharpened measuring tip,
water-proof and oven-proof
Rated length = 150 mm, Ø probe tip 3 mm
NiCr-Ni thermocouples
for testo 950, 650, 400
T/C made of fibre glass insulated thermal pipes
Insulation: twin conductor, flat, oval, opposed and covered with fibre glass, both
conductors are wrapped together with glass fibre and soaked with lacquer
;
wire: Ø 0.2 mm; outer: Ø 1 x 0.8 mm
Adhesive thermocouple, base material: aluminium foil
Is fixed at the measuring point using conventional adhesives or silicone heat
paste, Part no. 0554.0004, Ø extension 2 x 0.2 mm, thickness 0.1 mm
Adapter to connect NiCr-Ni thermocouples and
probes with open wire ends
Other temperature probes
for testo 950, 650, 400
Globe thermometer to measure radiant heat, NTC
sensor, Ø ball: approx. 150 mm
Corresponds to following requirements: ISO 7243, ISO 7726, DIN EN 27726,
DIN 33403.
Infrared probe for non-contact temperature
measurement on live, inaccessible and rotating parts
Accessories for temperature probes
Silicone heat paste (14g), Tmax = +260 °C
* With EEPROM: • Measuring range limits are stored in the probe
• Adjustment at 1 measuring point • Surface correction in surface probe can be adapted to measuring task
-200 to +400 °C
Class A
20
0604.0273
-100 to +400 °C
1/10 Class B**
30
0628.0015*
-200 to +600 °C
Class A
30
1.5 m
silicone
0604.2573
0554.7072
-100 to +400 °C
1/10 Class B**
80
in
Wasser
0628.0016*
** 1/10 Class B (0 to +100 °C)
1/5 Class B (remaining range)
to DIN IEC 751
Plug-in head
please order connection
cable (p. 61)
Plug-in head
please order connection
cable (p. 61)
Plug-in head
please order connection
cable (p. 61)
Pt100 immersion/penetration probes
for testo 950, 650, 400
Meas. range/Accuracy
t
99
s
Connection cable Part no.
Please order
adapter
0600.1693
0 to100 %RH
-20 to +70 °C
±2 %RH (2 to 98%RH)
±0,4 °C (-10 to 50°C)
±0,5 °C (rem. range)
<15
Plug-in head
Please order
connection cable (p.61)
0636.2130
