Cabinet for Moist Storage
of Mortar Prisms in Triple Moulds
1.0330
16
4.
Maintenance, care, and cleaning of the system
4.1 General instructions
It may be necessary to conduct special maintenance work on the Cabinet: for example,
repairs, exchange of parts, and any other work that is not described in this Operating
Manual. If such work becomes necessary, then you must get into direct contact with the
manufacturer.
After the Cabinet has been used for a longer period of time, we recommend that you give
it a thorough cleaning on the outside and inside. The frequency and thoroughness of
cleaning will depend on how often you use the Cabinet, and on the ambient conditions.
All maintenance work on the components of the Cabinet, and on its electrical system,
must be conducted by specialists.
After a certain period of time, spots can form on the stainless-steel surfaces of the Cabi-
net, and the surfaces can become unsightly. In such cases, please use a normal, com-
mercially available cleaning agent especially designed for stainless steel or with lukewarm
soapy water. After cleaning, wipe off the cleaned parts with clear, warm water so that
there is no soap remaining on the parts. Finally, carefully dry off all parts that you have
cleaned.
Caution
Never use a direct stream of water or a high-pressure cleaning system
to spray water onto the Cabinet. Such action would damage the sys-
tem and would represent a safety hazard.
Do NOT in any case use normal-steel wool or steel brushes or similar
tools made of normal steel to clean the parts of the Cabinet. The use
of such tools could cause particles containing iron to remain on the
stainless steel surfaces of the Cabinet. This would cause rust spots
by means of oxidation. If necessary in extreme cases, you may use
stainless-steel wool to clean stubborn spots on the Cabinet. In this
case, however, press the stainless-steel wool only in the direction of
the satin finish of the Cabinet.
The User is responsible to ensure that all maintenance, inspection, and assembly work
is performed only by authorized and qualified specialist persons who have carefully stud-
ied all instructions in this Operating Manual.
If a water storage tank is used to provide the water for the Cabinet, it is necessary to
check the level of the water in the tank
every day
.
From time to time, we recommend that you remove any particles of building materials that
may have fallen to the bottom. To perform this cleaning, first remove the shelves and the
bottom metal closure panel.
We recommend that you replac the filter once a year.Filters can be obtained from your
dealer.
