Cabinet for Moist Storage
of Mortar Prisms in Triple Moulds
1.0330
17
Changing the filter: Take the filter by the handle.Turn it 90
°
to the left or right and re-
move.
Inserting the filter: Insert with the handle in a vertical position. Turn it 90
°
to the left or
right until it clicks into place.
Saving energy:
Do not cover ventilation opeins or grille.
Alwaya keep fan louvers clear.
The energy consumption depends on the installation conditions, e.g. the ambient
temperature.
Keep the time the appliance is open to a minimum.
Accumumulated dust increases the energy consumption:
Once a year, dust the refrigerating unit together with the metal grille of the heat
exchanger at the back of the appliance.
4.2 Care of the indicator instruments
To clean the plastic film on the front, use normally available cleaning agents: for example,
household washing-up liquid. Do
NOT
use organic solvents such as petroleum ether,
turpentine, kerosene, methylated alcohol, or the like. Also do not use high-pressure clean-
ing equipment.
4.3 Care of the humidifier
Never perform any maintenance or repair work on the Cabinet before shutting down the
system. Before performing any repair or maintenance work, first switch off the power sup-
ply to the system. After shutting off the power, first use a meter to ensure that the system
is in fact completely without electric power. IMPORTANT: It is in such cases absolutely
necessary to follow the instructions given in this Operating Manual for shutting down the
Cabinet.
The User must provide a drain pipe connected to the building piping system to drain away
the safety overflow from the humidifier, and to drain off the condensed water that collects
in the system.
