background image

25

CHAPTER 4: Operation

4.6 Using the Command Keys

There are sixteen pushbutton keys on the keypad of the
Ranger. Twelve of these are a standard telephone keypad;
the four keys in a single row at the top are the Ranger’s
command keys. The command keys each have multiple
functions, depending on which operating mode the
Ranger is in and the Function key.

4.6.1 Command-Key Functions In Normal TALK Mode 

In regular TALK mode, the labels printed on the 
keys describe their functions. (The abbreviations in
parentheses in the paragraphs below are the actual
labels on the keys themselves.)

• The Flash (Flsh) key breaks the phone line 

connection for 0.6 seconds, simulating a phone
“hookflash” signal. Hookflashes are often used 
to transfer calls or to activate special PABX or 
central-office features.

• When dialing is not in progress, the T/P (Tone)

key toggles the test set between tone (DTMF) and
pulse dialing. The current dialing mode is displayed
on the bottom line of the LCD. While dialing is in
progress, the Tone key can be used to switch from
pulse to tone mode for sending tones after making

24

Lil’ Buttie RANGER

4.5 Using the Function Button

The Function (FCN) button acts to modify the operation
of some of the keys on the keypad. The function button
must be pressed or held down prior to pressing the key
that the user wants to modify. Pressing a key that the
function does not affect will cause the function button 
to be ignored. The affect of the function button on the
command keys is described in Section 4.6 below. 

The affect of the function button on the standard keypad
keys is shown on the keypad by the white printing on the
test set above the affected key:

• Star (*) – key becomes CL, a clear for the 

LCD when it is displaying caller ID or DTMF 
information, or while editing memory dial 
numbers or names.

• – key is shifted to A for dialing or saving a 

DTMF tone that is not normally available on 
a 12-key telephone keypad.

• – key is shifted to B in a similar fashion
• – key is shifted to C
• Pound (#) – key is shifted to D

Summary of Contents for Lil' Buttie Ranger



























Reviews: