16
15
AC Current
Resistance
Continuity
Rated fuse
400
Ω
4
㏀
40
㏀
400
㏀
4
㏁
40
㏁
0.2uV
2uV
20uV
200uV
2mV
0.1
Ω
1
Ω
10
Ω
100
Ω
1
㏀
10
㏀
±
(1.5% + 5dgts)
(40Hz ~ 500Hz)
40Hz ~ 500Hz
±
(1.8% + 5dgts)
(40Hz ~ 500Hz)
40Hz ~ 500Hz
±
(3.0% + 4dgts)
40Hz ~ 500Hz
±
(1.0% + 4dgts)
±
(1.0% + 2dgts)
±
(2.0% + 4dgts)
±
(3.0% + 5dgts)
Measuring Measured Value Minimum Accuracy
Item Measuring
4mV
400mV
10A
400uA
4mA
40mA
400mA
10A
Beeper is activated when the resistance is below 80
Ω
250 Volt 800 mA
◉
Power ON/OFF
•
The Power slide switch is located on the side of Rapport337.
Turn the Power slide switch on, and press
to start the Rappor337.
To turn off the system, press more than 3 sec. Then, POWER OFF
is displayed on the main screen with a beep. Release the button.
The power goes off.
•
A rechargeable battery should be plugged in over 8 hrs for full charge.
The charged battery can operate for 4 hrs or so.
•
When the battery indicator shows below [][], recharge it for use.
(Full charge : [][][][])
◉
OSD Setup Screen when Power is on
•
W h e n p o w e r i s o n , t h e s e t u p O S D i s d i s p l a y e d , a n d i t e n t e r s
automatically to the video test mode after 3 ~ 5 sec.
The initial OSD displays its RAPPORT337 version and the initial setup
on the screen.
Product Version : 3.01
Firmware Version : 3.02
Initial Protocol : PELCO-D
TV mode
: NTSC/PAL automatic setup
Battery indicator : [][][][]
RAPPORT : User's name(Name can be changed in Main menu.)
•
Model & software versions are subject to be changed without any further
notice.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
FAX 781.665.0780 - TestEquipmentDepot.com
