Tesmec PT2450, Installation, Operation And Maintenance Manual

Page: 61 / 154

HYDRAULIC PULLER TENSIONER PT2450
Manual: MI-PT2450-050-00-GB Date: 28.07.2018 Author: AT Page: 58 of
89
5.2 ROPE OR CONDUCTOR MACHINE CHARGING
In the wire and conductor charging phases on the machine, they can be used two special commands, which
I allow the operator to separately manage the movement of the bull-wheels or connected to the machine
reel elevators.
on radio control button to move the
reel elevator.
This button allows the operator to rotate the
gantry holding closed the negative brake
circuit of the bull-wheels.
on-screen button to move only the bull-
wheels circuit.
In this configuration, you can move the bull-
wheels excluding the reel elevators circuit.
ATTENTION: This function should only be used during loading or separate
stand management.
During the operations of tensioning and whenever the conductor and the cable
is located on both the bull-wheels that on the stand, it is necessary to set the
STRINGING mode.