Tesmec PT2450, Installation, Operation And Maintenance Manual

Page: 89 / 154

HYDRAULIC PULLER TENSIONER PT2450
Manual: MI-PT2450-050-00-GB Date: 28.07.2018 Author: AT Page: 86 of
89
ATTENTION: make maximum care when filling to make sure no foreign matter,
which could cause irreparable damages to the circuit’s components, enters
along with the oil.
For further maintenance operations of installed mechanic components (reduction gear, negative brakes),
refer to the enclosed documentation.
8.8 RADIATORS’ MAINTENANCE
At least once a year, or more in case of use in dusty places, is foreseen a blowhole with compressed air of
the radiant mass of the radiators.
ATTENTION: in order to make this operation the one in charge of maintenance,
besides wearing all the protection devices already shown in this manual, must
also wear a device for protecting respiratory organs.
8.9 GREASING
Grease 2-3 times per day the crown gear of the bull-wheels using the suitable greaser .
Weekly grease all the other parts subjected to rotation or translation and that not foreseen a forced
lubrication or an automatic greasing.
Use IP ATHESIA GR2 (ISO XBCEA 2) grease or equivalent of another trademark based on the enclosed
"SUGGESTED LUBRICANTS" table.
8.10 OTHER PERIODIC OPERATIONS
When cleaning the machine, avoid direct jets of water or steam on the components of the electric system
of the machine and on the control panel.
For the other periodic operations, refer to the summary table for the ordinary maintenance (see next
paragraph).