Tesmec AFS404, Installation Operation & Maintenance

Page: 36 / 108

PULLER-TENSIONER
Model: AFS404
Manual: MI-AFS404-609-01-GB Date: 15.03.2016 Author: MC Page: 33 of 35
7.8
RADIATOR’S MAINTENANCE
At least once a year, or more in case of use in dusty places, is foreseen a blowhole with compressed
air of the radiant mass of the radiators.
ATTENTION: in order to make this operation the one in charge of maintenance, besides
wearing all the protection devices already shown in this manual, must also wear a device for
protecting respiratory organs.
7.9 GREASING
Grease 2-3 times per day the crown gear of the bull-wheels using the suitable greaser (table 2, pos. 2).
Weekly grease all the other parts subjected to rotation or translation and that not foreseen a forced
lubrication or an automatic greasing.
Use IP ATHESIA GR2 (ISO XBCEA 2) grease or equivalent of another trademark based on the
enclosed "SUGGESTED LUBRICANTS" table.
7.10 OTHER PERIODIC OPERATIONS
When cleaning the machine, avoid direct jets of water or steam on the components of the electric
system of the machine and on the control panel.
For the other periodic operations, refer to the summary table for the ordinary maintenance (see next
paragraph).
7.11 SUMMARY TABLE FOR ORDINARY MAINTENANCE
In this card are listed main operation of periodic maintenance and relevant intervals.
Part Object
Interval
Daily 50 h 250 h 500 h 1500 h
Diesel engine (***)
Engine oil CL ST
Oil filter ST
Cooling liquid CL ST
Air filter VF ST
Fuel CL
Fuel filter ST
Hydraulic circuit
Hydraulic oil CL ST1 ST(*)
Filters
VF ST1 ST(*)
Negative brake Discs (**)
Reduction gear Oil CL ST1 ST(*)
Bull-wheels Gears GR
Front plough Rod GR
Axle
Tyres pressure VF
Stationary brake GR
Legend:
CL Check the level (and possible filling up)
GR Grease
ST Replace
ST1 Replace (only for the first intervene)
VF Check
(*) Or in any case every year
(**) Check the discs wear condition after an emergency stop
(***) For further information see the engine booklet