Tesmec AFS303, Installation, Operation And Maintenance Manual

Page: 7 / 88

PULLER-TENSIONER
Model: AFS303
Manual: MI-AFS303-320-00-GB Date: 30.03.2015 Author: MC Page: 4 of 32
2.5 TECHNICAL CHARACTERISTICS
Bull-wheels diameter: 1500 mm with interchangeable nylon sectors
Diesel engine: 37,5 kW
– 3000 rpm – KOHLER KDW 2204
Electric system: 12 V
Transmission: closed hydraulic circuit with hydraulic oil cooling
Safety brake: negative and self-acting type
Dynamometer: hydraulic with set-point and automatic control of maximum pull
Axle: rigid type with mechanical parking brake for towing at a max.
speed of 30-km/h
Dimensions: length - 3680 mm
width - 1730 mm
height - 2770 mm
Mass without oil: 2600 kg
Mass with oil: 2740 kg
2.6 ACOUSTIC EMISSION
Level of continuous sound pressure to the operator seat (UNI 9432) Lep = 85 dB(A)
2.7 GENERAL INFORMATION FOR THE MACHINE USE
a. Only employed and qualified operators must use the machine.
Qualified operators is intended to be the person who has received a qualified training from the using
Company or, as alternative, from the manufacturer.
b. Machine must be used only for the work it was designed for.
c. Machine cannot be used with non-authorised personnel on the working site.
d. For safety reasons, during transport machine comes without hydraulic oil and fuel.
Characteristics and required quantities are listed in the present manual.
e. For any doubt concerning use, functioning, maintenance or everything else, contact the After-sales
Service of the manufacturer.
2.8 GENERAL PRESCRIPTIONS FOR THE OPERATOR CHARGED OF THE MACHINE USE
a. Operator has to know safety directives for accident prevention in force in the machine using
country, for a correct use of the same.
b. The operator in charge with the installation and maintenance of the machine must use suitable
clothes to the working site and to the situation where he finds himself; in particular he must avoid
the use of very large clothes, chains, bracelets, rings or whatever can get entangled with moving
parts.
c. The operator has to use the necessary protecting devices (i.e. gloves, boots, helmet, etc.).
It is compulsory the use of personal protecting devices for hearing.
d. The operator must not carry out on his own initiative operations or interventions that are not up to
him.
e. The operator must carefully follow danger and/or prohibition prescriptions contained in the
instruction manual or indicated on the machine.
f. The working area of the operator has to be cleaned from possible oil or liquids wastes and free of
materials or equipment that may be considered as on obstacle for the operator work.
g. The operator must absolutely avoid the direct inhalation of the exhaust gas of the endothermic
engine.