Tesmec AFS303, Installation, Operation And Maintenance Manual

Page: 22 / 88

PULLER-TENSIONER
Model: AFS303
Manual: MI-AFS303-320-00-GB Date: 30.03.2015 Author: MC Page: 19 of 32
buttons. If the buttons are not pressed within 5 seconds, the time displayed will be stored.
If the and buttons are pressed for more than 2 seconds, the fast time-setting mode is
activated.
If the ignition is switched off while the heater is operating in the continuous mode, the remaining
operating time of 15 minutes is displayed and the heater continues to operated for this period of time.
4.13.3 SWITCHING THE HEATER ON (OPTIONAL)
Manually: by pressing the button (continuous heating mode).
Automatically: by programming the heater starting time.
4.13.4 SWITCHING THE HEATER OFF (OPTIONAL)
Manually: by pressing the button .
Automatically: after the programmed operating time has elapsed.
With the heater running: by programming the remaining operating time.
4.13.5 SETTING TIME/DAY OF THE WEEK (OPTIONAL)
Press the button for more than 2 seconds
– time of the day is flashing.
Set the clock using the and buttons
– day of the week is flashing – adjust the day of the week.
4.13.6 VIEWING THE TIME (OPTIONAL)
With the ignition switched off: press the button.
4.13.7 PROGRAMMING HEATER STARTING TIME (OPTIONAL)
Press the button
– the memory location is flashing – using the
and buttons set start of the
heater operating time. Day of the week is flashing
– set the day of the week.
By repeatedly pressing the button, memory locations 2 and 3 can be programmed or the time
display mode can be reached.
4.13.8 RECALLING/ERASING PRE-SET TIMES (OPTIONAL)
Repeatedly press the button until the desired memory location is displayed.
To erase the pre-set time, press the button several times until the time of the day is displayed
instead of the memory location.
4.13.9 PROGRAMMING DURATION OF OPERATING TIME (OPTIONAL)
The heater must be switched off. Press the button for 3 seconds
– operating times is flashing –
and set the desired operating time (10 to 120 minutes) using the and buttons.
4.13.10 SETTING THE REMAINING OPERATING TIME (OPTIONAL)
Set the desired remaining operating time (1 to 120 minutes) using the and buttons.
The remaining operating time refers to the time the heater still continues to remain in operation.
It can only be changed while the heater is in operation and the ignition switched off.
4.13.11 SETTING THE WAKEUP TIME (OPTIONAL)
A wakeup time can only be programmed on the standard digital timer.