01
02
5
6
7
8
4
3
2
1
Camera probe connector
.
Snap button: Photo taking/Start video recording/End video recording
.
Light control button: To adjust the the LED‘s brightness of the camera.
Up and down selection button/retate180°
.
Mode switch button: switch between three function modes:
Photo taking, video recording and playback.
Enter button: Confirm selection/freeze screen.
Settings button: enter/exit settings menu
.
Power button: long press to turn on/off
.
1
2
3
4
5
6
7
8
Ms450 is a high performance industrial endoscope with a 4.5 inches high
definition color IPS screen. It is ergonomically designed so that the main
functional buttons can be controlled within one hand. The snapshot and recoring
functions are supported, photos and videos can be saved on TF memory card
( Micro-SD card). This product is equipped with a LED-assisted illumination and
small-diameter HD camera, and the camera uses a high-sensitivity chip, so that
the product can be used in dark environments.
The camera probe is interchangeable, it can connect to different probes with
different lengths, diameter, view angles and focal length for using in different
inspection places.
*
*When the product is used in the environment with sharp staff, please be careful
to prevent the probe's waterproof protective layer from being scratched during
usage.
*The camera probe adopts materials which are not resistant to high temperature.
When checking the vehicle engine, please ensure that temperature inside the
engine drops to the normal temperature.
*This product is not suitable for people with limited physical, sensory or mental
capabilities to use it.
*Please do not allow children to touch or operate this device.
*If the device is damaged, do not disassemble it by yourself. Please contact the
seller or the agent where you bought it to get repair service.
Please do not violently hit the camera probe, and do not imprudently pull the cable.
Warning: This product is an industrial endoscope camera and is not intended
for medical use or human examination.
*Please use 5V household charger that meets the safety requlations to charge this
device
.
*This device can work while charging
.
*If you do not use the device for a long time, please ensure that it is charged at least
once
every 3 months to prevent irreparable damage caused by excessive battery
discharge
.
Product
anual
m
Safety and
maintenance
Battery
description
Functions
