Tesla TT37AF-1232IAW, User Manual

Page: 12 / 354

12
ENG
Pre-setting automatic operating program.
In this mode the appliance automatically
sets the operation to save energy.
Switch ON/OFF the LED display on
panel.
Press button to activate the SLEEP function,
and appears on the display.
Press again to cancel this function.
After 10 hours running in sleep mode, the air
conditioner will change to the previous setting mode.
Press button to active the function, the will
appear on the remote display. Do it again to deactivate
this function.
This function enables the remote control to measure the
temperature at its current location, and send this signal
to the air conditioner to optimize the temperature
around you and ensure the comfort.
It will automatically deactivate 2 hours later.
Press the button, the appears on the display,
and the appliance will run in ECO mode.
Press again to cancel it.
Note: The ECO function is available in both COOLING
and HEATING modes.
Press button to switch off the LED
display on the panel. Press again to switch on the
LED display.
1. Turn on the indoor unit at first, and long press
button 3 seconds to active, and do it again to
deactivate this function.
2. Under this function, short press button to
select the General type L3 - L2 - L1 - OF.
3. Select OF and wait 2 seconds to exit it.
1. Method 1: Press button DISPLAY 6 times in 8
seconds.
2. Method 2: Press button ECO 6 times in 8 seconds.
3. Method 3: Long press MODE and over 3 seconds.
You will hear 2 beeps and CF or AP will show on the
indoor display after the operation.
Only optional for some heating pump inverter
appliance.
To active this function, turn off the indoor unit at first,
then press
button then you will hear a beep,
will appear on the indoor LED, and will
appear on the remote display .
1. This function helps carry away the accumulated dirt,
bacteria, etc from the indoor evaporator.
2. This function will run about 30 minutes, and it will
return to the pre-setting mode. You can press
To activate turbo function, press the button,
and will appear on the display. Press again to
cancel this function. In COOL/ HEAT mode, when you
select TURBO feature, the appliance will turn to quick
COOL or quick HEAT mode, and operate the highest
fan speed to blow strong airflow.
1. Press button to active this function, and
will appears on the remote display. Do it again to
deactivate this function.
2. When the MUTE function runs, the remote controller
will display the auto fan speed, and the indoor unit
will operate at lowest fan speed to be quiet feeling.
3. When press FAN/ TURBO button, the MUTE function
will be cancel. MUTE function can not be activated
under dry mode.
SLEEP function
I FEEL function (Optional)
ECO function
DISPLAY function (Indoor
display)
GEN function (Optional)
Reset Wi-Fi
SELF-CLEAN function
(Optional)
TURBO function
MUTE function
Never position Flaps manually, the delicate
mechanism might seriously damaged!
Never put fingers, sticks or other objects into the
air inlet or outlet vents. Such accidental contact
with live parts might cause unforeseeable damage
or injury.