2/6
COPYRIGHT NOTICE
No part of this document may be reproduced, republished, translated or digitalized in any form or by
any means, without prior written permission of TESLA.
Information contained in this manual relates exclusively to the TERA system component specified on the
title page. New versions and modifications may be developed without prior notice to current users. TESLA
has made every attempt to provide you with complete, error-free and accurate information in this manual.
TESLA is not liable for errors or omissions contained in this document, or for any damages however resulted
from using or relying on any information contained herein. TESLA's liability for errors shall be strictly limited
to correcting such errors and providing advisory services as described below.
Users should be familiar with operation basis of used product. If you experience any problems with your
product, please contact us at:
TESLA
Podebradska 56/186
180 66 Prague 9
1
Introduction
This document describes technical specifications and user operation of TRR3 Wireless Repeater.
Product was developed and manufactured in the Czech Republic. All rights reserved TESLA. Offer or
delivery of products or services related to the product does not include transfer of ownership rights.
Before using the product, please read this manual carefully and understand all operating and safety
precautions. Compliance with operational and safety precaution can prevent from damage to equipment or
injuries to personnel. Operating and safety instructions in the document are marked as follows:
Attention!
This formatted text indicates the operating and safety instructions.
The product may only be used in the specified manner and for its intended purpose. The product may be
provided to third persons along with this documentation only.
2
Description and Utilization
Repeater is an autonomous element designed to increase the system range. It provides connection
between the central unit and other elements of wireless net where signal is too weak for direct connection.
This may happen in an empty space at a long distance. The range in buildings is dependent particularly on
building material (walls, partitions, floors, etc.). For example, in case of reinforced concrete skeleton, which
represents efficient shielding, problem can occur even at very short distances. Repeater contains radio
module which only repeats (retransmits) received data in both directions. The device can be switched
ON/OFF by switch.
LEDs „STAT“ a „CHRG“ indicate current status of
device see
´
Operation manual
´
below.
Internal accumulator ensures autonomous operation due for more than 1 year after full charging. For
permanent powering is possible to connect power adaptor 230VAC/5VDC.
Attention! For setting and controling of Repeater it is essential to have wireless Central Unit in system,
see
. Central Unit is not included with package of TRR3 and it is sold and delivered
extra.
Setting and configuration of TRR3 Wireless Repeater and whole system is also managed by connected
computer to Central Unit and TERAview application on PC.
TERAview application, drivers and user manual with detail configuration description is free downloaded
TRR3 Wireless Repeater can be used in these systems:
A)
TERA System for Radon Concentration Measurement (Figure 1)
B)
TERA System for Regulating Radon Concentrations (Figure 2)
