TI45014D Battery Charger/Conditioner
17
5
Operation Procedures
5.3 – Disconnecting the Battery Charger
1.
If the TI45014D Battery Charger is hard mounted to the vehicle:
Disconnect the AC Line Cord from the AC Source.
A.
Disconnect the AC Line Cord from the Battery Charger.
B.
Stow the AC Line Cord for later use.
C.
2.
If the TI45014D Battery Charger is not hard mounted to the vehicle:
Unplug the AC Line Cord from AC Source.
A.
Unplug the AC Line Cord from the TI450.
B.
Disconnect the Negative (Black) lead of the Alligator Clamp from the Battery.
C.
Disconnect the Positive (Red) lead of the Alligator Clamp from the Battery.
D.
Disconnect the DC Output cable.
E.
5.4 – After Operation
Although the battery charger is ruggedized, good general care should be taken to maxi-
mize its life. Therefore, protect the unit from the elements and man-made hazards
whenever possible. Do not expose to wet or dusty environments (rain, snow, sand, etc.)
as this may damage internal circuitry. See Section 1.3 for more information concerning
water infiltration.