TI45014D Battery Charger/Conditioner
22
6
Unit Care and Maintenance
Checking DC Voltage at the DC Output Cable
In order to properly test the dc output the unit needs to be connected to a battery. Make sure to reconnect
the DC Output Cable according to Section 5 Pre-Operation procedures. Then, plug the unit into the appro-
priate line voltage. Once this is accomplished, set your digital multimeter to measure dc voltage. Place
the positive probe (red) of the multimeter on the positive clamp (red) of the DC Output Cable. Next, place
the negative probe (black) on the negative clamp (black) of the DC Output Cable. The multimeter display
should read between 14.240 ± 50mV for the TI45014D charger. If the unit is not providing any output
voltage refer to Section 8 under Troubleshooting. Otherwise, contact the Tesla™ Customer Service at (302)
324-8910.
Once the TI45014D Battery Charger/Conditioner has fully passed function test procedures, the unit is
ready for use.
6.3 – Unit Servicing
The TI45014D Battery Charger/Conditioner is a maintenance-free,
sealed unit. No repairs outside of Tesla™ are authorized. Warranty
will be voided if unit is tampered with in any way including any dam-
age to the WARRANTY VOID stickers located on the case (see Figure
6.3.1 below). If the unit requires maintenance, please contact Tesla™
Customer Service at (302) 324-8910. A Repair Request Form can be
found on the last page of this manual or online at www.teslaind.com.
6.4 – Packaging and Shipping
When returning the TI45014D Battery Charger/Conditioner, please ensure that it is properly packaged.
Pack the unit in a box with at least 2-3 inches of clearance on all sides (be sure to enclose the Repair
Request Form). To guarantee that the unit remains centered within the box, do not use loose packing
materials such as packing peanuts. Instead, wrap the unit tightly in foam or other dense material until it
fits snugly in the box. Seal the box on all sides and return it to Tesla™. Please contact Tesla™ Customer
Service at (302) 324-8910 with any questions or concerns.
Figure 6.3.1 – Warranty Void
Sticker