Tesla RoboStar T10, Manual

Page: 29 / 32

o The front wheel or the
side brushes do not
work. Check the front wheel and the side brushes and
clean them.
o o Error of the bottom or
front sensor. Clean the bottom sensors; lightly press the front
bumper. Check there is no jammed object.
o o o The vacuum cleaner got
jammed. Move the vacuum cleaner and continue cleaning.
If the problem still occurs, check whether the battery is fully charged if it is, turn the vacuum
cleaner off and on again with the main switch.
CHARGING OF THE BATTERY
If you want charge up the vacuum cleaner, press the " HOME " (8) button on the remote control.
The vacuum cleaner will search for the charging station and automatically start charging the
battery. The full battery charge will be signaled by the green "CLEAN" lit green LED.
If the battery status is low, the vacuum cleaner will automatically search for the charging station
and start charging. Keep the charging station connected to the mains continuously otherwise the
vacuum cleaner will not be able to find it.
BATTERY MAINTENANCE
 If you are going to carry the robotic vacuum cleaner or not use it for a long time, press the
main switch to turn it off.
 We recommend using the charging station for charging.
 The vacuum cleaner is equipped with a special protection that stops charging the battery when
it is fully charged so the battery cannot be overcharged. This ensures a long service life of the
battery and the vacuum cleaner is always ready to start cleaning.
CLEANING THE VACUUM CLEANER
Empty the dust container after every cleaning. If the dust container is full it has a bad effect on the
suction power of the vacuum cleaner and the quality of the cleaning.