1
Top cover
5
Trash container door
2
Trash container
6
HEPA filter
3
Main switch (ON/OFF button)
7
HEPA filter frame
4
Primary filter
FIRST START - AUTOMATIC CLEANING
1.
This is the most common way of cleaning.
2.
Insert the batteries into the remote control, make sure the polarity is correct.
3.
Connect the charging station to an electrical outlet with a 230 V power adapter.
There must be no obstacles within 2 meters in front and 1
meter on the sides from the charging station.
The charging station must be placed on a flat surface, we
also recommend to fix the station to the wall or floor with
a double-sided adhesive tape.
Place the power cord so it does not get entangle in the
cleaning brushes of the vacuum cleaner.
You can also plug the 230 V power
adapter directly into the vacuum
cleaner.
4.
Place the vacuum cleaner in the charging station and the vacuum cleaner battery will start
charging automatically.
5.
Before putting the vacuum cleaner into operation, prepare the room so there are no objects on
the floor that may prevent the vacuum cleaner to operate properly (bigger sheets of paper,
cables, stickers, small items, inappropriately placed carpet, etc.).
6.
Remove the chairs and other larger items so the vacuum cleaner can easily reach inaccessible
places.
7.
To put into operation, press the "
CLEAN
" button on the remote control or on the top of the
device.
Summary of Contents for RoboStar T10
Page 1: ...TESLA RoboStar T10...
Page 32: ......