8
6
TIMER Button
Used to automatically start (AUTO ON) or automatically turn off (AUTO OFF) the air conditioner for a given time in
combination with the “INCREASE” (+) and “REDUCE” (-) buttons. The running on / off timer is indicated by the backlight of
the corresponding indicators on the control panel.
7
7
Button “BLINDS” (“SWING”) (only for models with automatic swinging of blinds)
Press this button to start automatic swinging of the blinds. Pressing this button again will stop the blinds at
one or another desired angle.
8
LED display
Shows the set temperature in "ºC" or in "° F" and automatic timer settings. While the air conditioner is in
“DRY” or “FAN” mode, the display shows the room temperature.
9
9
FOLLOW ME function (optional)
NOTE: This function is activated from the remote control. In this case, the remote control serves as a remote
temperature sensor, which allows more precise control of the air temperature in the room.
To activate the FOLLOW ME function, point the remote control at the air conditioner, then press the button
of the same name. The remote control captures the actual air temperature at its location. He will send this
data to the air conditioner every 3 minutes until you press the FOLLOW ME button again. If the air
conditioner does not receive FOLLOW ME signals within 7 minutes, it will give a sound signal announcing
the completion of this mode.
ERROR CODES AND PROTECTIONS:
«E1»
–
Room temperature sensor error - turn off the air conditioner, then turn it on again. If the error
persists, contact a service center.
«E2»
–
Evaporator temperature sensor error - turn off the air conditioner and then turn it on again. If the
error persists, contact a service center.
«E3»
–
Condenser temperature sensor error - turn off the air conditioner, then turn it on again. If the error
persists, contact a service center.
«E4»
–
Communication panel display error - turn off the air conditioner, then turn it on again. If the error
persists, contact a service center.
«P1»
–
The lower condensate (water) collection tray is full - connect the drain hose and drain the water
collected in the tray. If the error persists after this, contact the service center.
CONTROL PANEL
Summary of Contents for NIKOLACOOL TE-PT-12KHC-BLG
Page 3: ...2 www tesla com np...
